A Shadow Appears On The Leading Edge Of The Scanned Image - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 8 Troubleshooting
A shadow appears on the leading edge of the
scanned image.
Have you adjusted the offset (starting position for
scanning)?
Yes
Did you use the filtering function?
Yes
In [Device Setting] of the Software Operation Panel, adjust the offset in the sub-
scanning direction.
No
For more details, refer to "Adjusting the Starting Position for Scanning [Offset/
Vertical Magnification Adjustment]" (page
In [Device Setting 2] of the Software Operation Panel, use the filtering function to
fill out the shadow that appeared on the edge of the document.
No
For more details, refer to "Eliminating Shadows or Streaks on the Scanned Image
Edge [Page Edge Filler (ADF)]" (page
If the above countermeasures do not solve the problem, check the items in
Before You Contact the Scanner Service Provider" (page 166)
your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
186).
188).
first, then contact
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
"8.4
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
164