Chapter 4 How to Use the Operator Panel
5
After replacing the consumables or cleaning, select the
highlighted counter with the [ ] or [ ] button, and press
the [Counter Reset] button.
A message appears to confirm that you want to clear the counter.
The assist roller counter cannot be cleared. It requires a
service engineer to clear the counter.
For more information, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service
provider.
6
Select [1: Yes] by the [ ] or [ ] button, and press the
[Function/Enter] button to confirm.
The counter value will be reset to 0.
For ink level, the value will be set to 100.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
69