Chapter 7 Replacing Consumables
4 Pull the lever on the left side of the separator roller towards you,
and remove it with the shaft.
1
2
Separator Roller
4
Install a new separator roller on the scanner.
1 Install the separator roller. Insert the right side of the shaft first,
then the left side so that the tab fits in the groove.
2
1
Separator Roller
2 Push up the lever which is located on the left side of the separator
roller.
Tab
3 Push up the lever which is located on the right side of the
separator roller.
Separator Roller
Separator Roller
TOP
Contents
Index
Introduction
Scanner
Overview
Lever
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Lever
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
135