Table of Contents
Advertisement
Chapter 8 Troubleshooting
Temporary Errors
The following are lists of temporary errors which can be
recovered by operators.
■
Paper feeding errors
Error codes beginning with the letter "J" are displayed.
Error
Error message
code
J1:31
Paper jam
J1:32
Remove the document and try
J1:34
again.
J1:35
J1:3A
J1:3B
J1:3C
J1:3D
J1:3E
Countermeasure
1 Remove the jammed
document(s). For
information on how to
remove documents, refer
to
"8.1 Paper Jam" (page
140).
2 Check if the documents
are suitable for scanning
by ADF.
For more details, refer to
"2.2 Documents for
Scanning" (page
40).
3 Clean the rollers.
For more details, refer to
"Chapter 6 Daily Care"
(page
118).
Error
Error message
code
J1:50
Paper jam
Remove the document and try
again.
J0:51
Paper jam
Remove the document and try
again.
Countermeasure
Introduction
1 Remove the jammed
document(s). For
Scanner
information on how to
Overview
remove documents, refer
to
"8.1 Paper Jam" (page
140).
How to Load
2 Check if the documents
Documents
are suitable for scanning
by ADF.
Configuring
For more details, refer to
the Scan
"2.2 Documents for
Settings
Scanning" (page
40).
How to Use
1 Remove the jammed
the Operator
document(s). For
information on how to
Panel
remove documents, refer
to
"8.1 Paper Jam" (page
Various Ways
140).
to Scan
2 Check if any bent/warped
documents or thin papers
that do not meet the
Daily Care
specification are mixed in
the batch.
For more details, refer to
Replacing
"2.2 Documents for
Consumables
Scanning" (page
40).
Troubleshooting
Operational
Settings
TOP
Contents
Index
Appendix
Glossary
143
Advertisement
Table of Contents
Troubleshooting
