Defining The Maximum Snmp Agent Packet Size - Cisco NCS 5000 Series Manual

Defining the Maximum SNMP Agent Packet Size

DETAILED STEPS
Command or Action
Step 1
configure
Step 2 snmp-server contact system-contact-string
Example:
RP/0/RP0/CPU0:router(config)# snmp-server contact
Dial System Operator at beeper # 27345
Step 3 snmp-server location system-location
Example:
RP/0/RP0/CPU0:router(config)# snmp-server location
Building 3/Room 214
Step 4 snmp-server chassis-id serial-number
Example:
RP/0/RP0/CPU0:router(config)# snmp-server chassis-id
1234456
Step 5
commit
Defining the Maximum SNMP Agent Packet Size
This task shows how to configure the largest SNMP packet size permitted when the SNMP server is receiving
a request or generating a reply.
The sequence in which you issue the snmp-server commands for this task does not matter.
Note
SUMMARY STEPS
1. configure
2. (Optional)
3. commit
DETAILED STEPS
Command or Action
Step 1 configure
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
36
snmp-server packetsize byte-count
Implementing SNMP
Purpose
(Optional)
Sets the system contact string.
(Optional)
Sets the system location string.
(Optional)
Sets the system serial number.
Purpose