3Com 3032 Configuration Manual page 271

Configure Frame Relay
DE Rule List
Configure Frame Relay
Queueing Management
1 Configure a DE rule list
Perform the following configurations in system view.
Table 307 Configure a DE rule list
Operation
Configure an interface-based DE rule list
Delete the interface-based DE rule
Configure a protocol-based DE rule list
Delete the protocol-based DE rule
By default, no DE rule list is defined.
A router can support up to 10 DE rule lists, and each of them can contain up to
100 DE rules.
The commands
fr del inbound-interface
to add multiple rules to a DE rule list. The commands
inbound-interface
time. To delete a DE rule list, the user should delete all the DE rules in it.
2 Apply the DE rule list on a Frame Relay PVC
Perform the following configurations in synchronous serial interface view.
Table 308 Apply the DE rule list on a Frame Relay PVC
Operation
Apply the DE rule list on a Frame Relay PVC
Delete a DE rule list from the Frame Relay
PVC
By default, no DE rule lists are applied on Frame Relay PVCs.
1 Configure the Frame Relay PVC queueing
After the Frame Relay traffic shaping is enabled on a Frame Relay interface, each
PVC under this interface will own its independent PVC queue. If the function is not
enabled on the Frame Relay interface, the PVCs will have no PVC queues.
Perform the following configurations in frame relay class view.
Table 309 Configure the Frame Relay PVC queueing
Operation
Set the FIFO queue length of a Frame Relay PVC fifo queue-length queue-size
Restore the FIFO queue length of a Frame Relay
PVC to the default value
Set the queue type of a Frame Relay PVC to PQ pq pql list-number
Restore the queue type of a Frame Relay PVC to
FIFO
Command
fr del list-number
inbound-interface type number
undo fr del list-number
inbound-interface type number
fr del list-number protocol
protocol [ characteristic ]
undo fr del list-number protocol
protocol [ characteristic ]
and
undo fr del protocol
Command
fr de del list-number dlci-number
undo fr de del list-number
dlci-number
Configure Frame Relay QoS
and
fr del protocol
undo fr del
can delete one DE rule each
Command
undo fifo queue-length
undo pq pql
267
can be used