Debugging Tools - 3Com 3032 Configuration Manual

6
Display Command Set
Debugging Command
Set
D
ISPLAY AND
This chapter includes information on the following topics:
Display Command Set
Debugging Command Set
Test Tool of Network Connection
Log Function
With commands, the system status and system information can be
display
viewed. commands can be divided as follows according to the
display
functionality:
The command to display system configuration information
The command to display system running status
The command to display system statistic information
The following commands can be used to display related information of the whole
system in all views. Please see related chapters in this manual for specific
commands.
Table 64 Commands to display information of the whole system
Operation
Display current terminal user.
Display the system clock
Display the current memory type
Display states of various debugging switches
Display the history record of input command
Display the router name
Display current configuration information of the
system
Display initial configuration information of the system
stored in router Flash
Display primary system configuration information
Display registered terminal user
Display version information of system
The command line interface of the 3Com Router 1.x provides abundant
commands, almost corresponding to all the protocols supported by the
debugging
router, helping the user to diagnose and eliminate network faults.
D
EBUGGING
Command
display client
display clock
display configfile
display debugging
display history-command
display systname
display
current-configuration
display saved-configuration
display tech-support [ page
]
display user
display version
T
OOLS
display