Configuring A Modem - 3Com 3032 Configuration Manual

Configuring a Modem

Configure the Modem
Dial-in and Dial-out
Authorities
Table 775 Script Keywords
Keyword
ABORT receive-string
TIMEOUT seconds
In which, seconds defaults to 180 and is in the range of 0 to 180.
Table 776 Script Escape Characters
Escape character
\c
\d
\n
\r
\s
\t
\\
\T
Modem Configuration includes:
Configure the Modem Dial-in and Dial-out Authorities
Configure Modem Through the AT Command
Configure a Modem Script
Execute a Modem Script Manually
Specify the Events that Trigger Modem Scripts
Configure the modem-related operation mode for the asynchronous interface
Configure the Modem Answer Mode
Configure Authentication for a Modem Dial-in User
Perform the following configuration in interface (asynchronous serial, AUX or AM
interface) view.
Table 777 Configure the Modem Dial-In and Dial-Out Authorities
Operation
Enable only modem dial-in
Enable only modem dial-out
Enable both modem dial-in and dial-out
Disable both modem dial-in and dial-out
By default, modem dial-in and dial-out are allowed.
Description
The string following ABORT will be compared with the strings sent
from a modems or remote DTE device for a match. The match mode
is full match. Multiple ABORT entries can be configured for a script,
and all of them take effect in the whole script execution period.
The digit following TIMEOUT is used to set the timeout interval that
the device waits for receiving strings. If no expected strings are
received within the interval, the execution of the script will fail.
Once being set, the setting will be valid till a new TIMEOUT is set.
Description
Only the specified string can be sent and the character "Enter" will
not be sent.The character of "\c" must be at the end of the sending
strings. Otherwise,it is invalid at other location.
Represents pausing 2 seconds.
Represents the character "newline".
Represents the character "Enter".
Represents the character "Space".
Represents the character "Tab".
Represents the character "\".
Represents telephone number.
Command
modem in
modem out
modem
undo modem
Configuring a Modem 751