3Com 3032 Configuration Manual page 108

104 C 7: POS T A S
HAPTER ERMINAL CCESS ERVICE
[RouterA] interface async 1
[RouterA-Async1] undo modem
[RouterA-Async0] flow-control none
[RouterA-Async0] undo detect dsr-dtr
[RouterA-Async1] async mode pos 2
f Configure POS access interface 2.
[RouterA] interface async 2
[RouterA-Async2] undo modem
[RouterA-Async0] flow-control none
[RouterA-Async0] undo detect dsr-dtr
[RouterA-Async2] async mode pos 3
g Configure the route to Router B (take the static route as example).
[RouterA-Async2] quit
[RouterA] ip route-static 10.1.1.2 255.255.255.0 serial 0
2 Configure Router B
a Configure the Ethernet interface Ethernet 0.
[RouterB] interface ethernet 0
[RouterB-Ethernet0] ip address 10.1.1.2 255.255.255.0