3Com 3032 Configuration Manual page 756

752 C 52: C
HAPTER ONFIGURING
Configure Modem
Through the AT
Command
Configure a Modem
Script
Execute a Modem Script
Manually
Specify the Events that
Trigger Modem Scripts
M
ODEM
Perform the following configuration in interface (asynchronous serial, AUX or AM
interface) view.
Table 778 Configure a Modem Script
Operation
Configure modem through the AT
Command
A modem can accept the AT commands only when it is in AT command mode. If it
is forwarding data, the AT command sent via the
invalid.
Perform the following configuration in system view.
Table 779 Configure a Modem Script
Operation
Define a modem script
Delete the modem script
For the format of script, refer to the modem script syntax description.
If necessary, the user can execute the modem script through the
command for managing the external modem to which the interface is connected.
Perform the following configuration in interface (asynchronous serial, AUX or AM
interface) view.
Table 780 Execute a Modem Script Manually
Operation
Manually execute a modem script
Associating modem scripts with events, is to automatically execute the
corresponding script after a particular event occurs to the router. In 3Com routers,
the following script events are supported:
An outgoing call is established to a line: The specified script will be executed if
a modem outgoing call is established.
An incoming call is established to a line: The specified script will be executed if
a modem incoming call is established.
DCC dial: Start the dial script when implementing DCC dial.
Line reset: Execute the specified script when a line is disconnected.
Power on the system and reboot it: Execute the specified script on the
corresponding asynchronous serial interface when the system is powered on
and initialized.
For the the events in the previous list, the corresponding scripts can be specified
through the script command.
Command
sendat at-string
sendat at-string
Command
script-string script-name
script-content
undo script-string script-name
Command
start-chat script-name
command is
start-chat