Clear Service-Profile - 3Com WX4400 Command Reference Manual

clear service-profile

set radio-profile mode on page 380
display radio-profile on page 327
Removes a service profile or resets one of the profile's parameters to its
default value.
Syntax —
clear service-profile name
[soda {agent-directory | failure-page | remediation-acl |
success-page | logout-page}]
soda agent-directory —
On-Demand (SODA) agent files to the default directory. By default,
the directory name for SODA agent files is the same as the service
profile name.
soda failure-page
fails the checks performed by the SODA agent. By default, the page is
generated dynamically.
soda remediation-acl
ACL for the service profile. When no remediation ACL is specified, a
client is disconnected form the network when it fails SODA agent
checks.
soda success-page
passes the checks performed by the SODA agent. By default, the page
is generated dynamically.
soda logout-page
logs out of the network. By default, the client is disconnected from
the network without a page being loaded.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Options added to clear SODA
parameters in Version 4.2.
Usage — If the service profile is mapped to a radio profile, you must
remove it from the radio profile first. (After disabling all radios that use
the radio profile, use the clear radio-profile name service-profile name
command.)
Resets the directory for Sygate
— Resets the page that is loaded when a client
— Disables use of the specified remediation
— Resets the page that is loaded when a client
— Resets the page that is loaded when a client
clear service-profile 295