Router]Interface Serial - 3Com 3032 Configuration Manual

754 C 52: C
HAPTER ONFIGURING
Displaying and
Debugging a Modem
Modem Configuration
Examples
Managing a Modem
Through a Modem Script
M
ODEM
Table 783 Configure Authentication for Modem Dial-In User
Operation
Configure authentication for modem
dial-in user
Delete authentication for modem dial-in
user
By default, the authentication for a modem dial-in user is not configured.
Executethe
debugging
Table 784 Display and Debug Modem
Operation
Enable debugging of the AT command of
modem
Enable modem event debugging
This section provides the following examples:
Managing a Modem Through a Modem Script
Power-on Initialization through the Initialization Script
Use the Script to Dial Directly
Authentication for Modem Dial-in User
Configure a Modem adaptation baud rate
On the asynchronous interface connected to the modem, use a standard AT
command to configure the modem baud rate, and send the "AT" command to
the modem. If "OK" is received from the modem, it indicates that the modem can
automatically adapt to the corresponding baud rate. Then, write the configuration
into the modem for conservation, and the corresponding AT command is
"AT&W".
Figure 241 Network of the configuration for the router to manage the modem
Router
PC
1 Configure a modem script.
[Router]script-string baud "" AT OK AT&W OK
2 Execute the corresponding script in interface view, supposing the modem is
connected to the interface Serial0.

[Router]interface serial 0

[Router-Serial0]start-chat baud
Command
modem-login
undo modem-login
command in all views for the debugging.
Command
debugging modem at [ interface type
number ]
debugging modem event [ interface
type number ]
Modem
PSTN