3Com 3032 Configuration Manual page 10

6 C 1: 3C
HAPTER OM
Features of the 3Com
Router Version 1.10
Attribute
Interconnection protocol LAN
R I
OUTER NTRODUCTION
Figure 1 Schematic diagram of the 3Com Router architecture
RIP OSPF BGP
System
service
PPP/SLIP
The following table lists the basic features of the 3Com Router 1.x:
Table 3 List of the 3Com Router 1.x features
Description
WAN
Dial-up network
VPN
HTTP
FTP TELNET
Voice Service
Route policy
management
IP forwarding engine
Fast IP security
forwarding and firewall
Frame Relay HDLC
Supports Ethernet_II and Ethernet_SNAP frame structure
Follows IEEE 802.2 and IEEE 802.3 regulations
Supports Frame Relay and Frame Relay switching
Supports FRoIP, FRoISDN
Supports Multi-link Frame Relay (MFR), FR compression
Supports FR Traffic Shaping (FRTS) to ensure even traffic over
the VCs on FR
Supports X.25 and X.25 switching, X.25 Over TCP (XOT)
Supports HDLC, SDLC and LAPB regulations
Supports SLIP, PPP and MP
Supports PPPoE Client
Supports ITU-T Q.921 and Q.931 regulations, ISDN (ITU-T
Q.921, Q.931) and ISDN semi-permanent connection
Supports bridging technology
Manages Modem through the AT command and configures
script to dial up.
Supports dial demand Routing (dialer profiles and legacy
BDR)
Supports Callback (PPP callback and ISDN Calling Line
Identification callback)
Provides ISDN leased line, automatic dialing, and cyclic dial
queue backup
Provides Dial interface backup
Supports L2TP, implements VPDN (Supports DNIS user,
domain name user, and full name user)
Supports L3 channel protocol GRE
......
VPN
TCP/UDP
QoS
assurance
X.25
Command
line
SNMP
Web
management
Ethernet