3Com 3032 Configuration Manual page 122

3com 3032: user guide
Hide thumbs Also See for 3032:
Table of Contents

Advertisement

118
C
10: C
HAPTER
ONFIGURING
WAN I
NTERFACE
Set the asynchronous serial interface to work in dialup or dedicated line mode
Set link layer protocol
Set baud rate
Set link establishment mode
Set the check mode in flow mode
Set stop bit in flow mode
Set data bit in flow mode
Set flow control mode
Enable or disable level detection
Enable or disable internal loopback and external loopback
Set MTU
Setting the coding format of Modem
The asynchronous serial interface may also need to be configured with SLIP
parameter, PPP parameter, BDR parameter, IP address, firewall and standby center
parameter as required.
1 Set the synchronous/asynchronous serial interface to work in asynchronous mode
If the physical interface to be configured is synchronous/asynchronous serial
interface, it must be set to work in asynchronous mode by executing the following
commands.
Please use the following command in the view of synchronous / asynchronous
serial interface
Table 94 Set the synchronous/asynchronous serial interface to work in asynchronous
mode
Operation
Set the synchronous/asynchronous serial interface to
work in asynchronous mode.
The synchronous/asynchronous serial interface works in synchronous mode by
default.
2 Enter the view of specified asynchronous serial interface
Please use the following commands to enter the view of the specified serial
interface in all views.
Table 95 Enter view of specified asynchronous interface
Operation
Enter the view of specified asynchronous serial interface
Enter the view of the specified synchronous/asynchronous
serial interface (which has been set to work in
asynchronous mode)
3 Set the asynchronous serial interface to work in dialup or dedicated line mode.
For special asynchronous serial interface or the asynchronous serial interface set
from synchronous/asynchronous serial interface, it is possible to dialup with
command. Please see Operation Manual - Dial-up for other settings and detailed
Command
physical-mode async
Command
interface async number
interface serial number
modem

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

303430333035304030413036 ... Show all

Table of Contents