3Com 3032 Configuration Manual page 257

Perform "Enabling/Disabling Frame Relay PVC switching" in system view, and
configure all the other commands in synchronous serial interface view.
Table 286 Configure the Frame Relay PVC switching
Operation
Enable the Frame Relay to carry out PVC
switching
Disable the Frame Relay to carry out PVC
switching
Set the Frame Relay interface type
By default, Frame Relay PVC switching is disabled.
The configured PVC can take effect only when the type of Frame Relay
interface is NNI or DCE.
b Configure Frame Relay switched route
Perform the following configurations in synchronous serial interface view.
Table 287 Configure the Frame Relay local virtual circuit number
Operation
Assign a PVC number for Frame Relay interface
Delete the PVC number of Frame Relay interface undo fr dlci dlci-number
Perform the following configurations in interface view.
Table 288 Configure the route for Frame Relay PVC switching
Operation
Configure the route for Frame Relay PVC
switching
Delete the route for Frame Relay PVC switching
By default, the Frame Relay switched route is not configured.
PVC switching can take effect only when the
configured on the two interfaces on the Frame Relay switched routers.
c Configure Frame Relay switched PVC
Perform the following configurations in interface view.
Table 289 Configure Frame Relay local switched PVC number
Operation
Assign a switched PVC number for the main
interface or the sub-interface
Delete the switched PVC number for the main
interface or the sub-interface
Perform the following configurations in system view.
Table 290 Configure the Frame Relay switched PVC
Operation
Configure the Frame Relay switched PVC
Delete the Frame Relay switched PVC
Configure Frame Relay
Command
fr switching
undo fr switching
fr interface-type { dte | dce |
nni }
Command
fr dlci dlci-number
Command
fr dlci-switch in-dlci
interface type number dlci
out-dlci
undo fr dlci-switch in-dlci
command is
fr dlci-switch
Command
fr dlci dlci-number
undo fr dlci dlci-number
Command
fr switch name interface type
number dlci dlci interface type
number dlci dlci
undo fr switch name
253