Plc Connecting Cables; Direct Serial Connections To A Plc - Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual

1-4

PLC Connecting Cables

1-4-1

Direct Serial Connections to a PLC

When connecting the computer running the CX-Integrator directly to a PLC using a
serial line, make the connection correctly using the following Connecting Cables and
connection diagrams.
Connecting Cables to CS/CJ-series PLCs
Unit
CPU Unit Built-in
peripheral port
Built-in
RS-232C port
D-sub 9-pin
female
USB port
Serial RS-232C port
Communications D-sub 9-pin
Boards/Units female
Refer to the following connection diagrams.
Connection to IBM PC/AT or Compatible
Connection to Peripheral Port
IBM PC/AT or compatible
9-pin
CS1W-CN226 (2.0 m)
CS1W-CN626 (6.0 m)
•When using an RS-232C cable for the computer running CX-Integrator and
Note
connecting to a CS/CJ-series PLC with a Toolbus connection, use a
XW2Z-200S-CV/500S-CV Connecting Cable. (This cable can be used only with IBM
PC/AT or compatible computers.)
•The following connection methods can be used when connecting an RS-232C cable
to a peripheral port on a CS/CJ-series PLC.
Unit port Computer
IBM PC/AT D-sub
or 9-pin male
compatible
IBM PC/AT D-sub
or 9-pin male
compatible
IBM PC/AT USB port
or
compatible
IBM PC/AT D-sub
or 9-pin male
compatible
Connection to RS-232C Port
9-pin
CPU Unit peripheral port
XW2Z-200S-CV (2.0 m)
XW2Z-500S-CV (5.0 m)
1-4
1-4-1 Direct Serial Connections to a PLC
Network type
Computer (serial
port communications
mode)
Peripheral bus
(Toolbus)
or Host Link
(SYSWAY)
Peripheral bus
(Toolbus)
or Host Link
(SYSWAY)
Host Link
(SYSWAY)
Peripheral bus
(Toolbus)
Host Link
(SYSWAY)
IBM PC/AT or compatible
Built-in RS-232C
port on CPU Unit
or port on Serial
Communications
Board/Unit
9-pin
PLC Connecting Cables
Model Length
CS1W-CN226/626 2 m/6 m ---
XW2Z-200S-CV/ 2 m/5 m Connector
500S-CV
XW2Z-200S-V/ 2 m/5 m ---
500S-V
--- ---
XW2Z-200S-CV/ 2 m/5 m Connector
500S-CV
XW2Z-200S-V/ 2 m/5 m ---
500S-V
Remarks
with ESD
(electrostatic
discharge)
counter-
measures
used.
---
with ESD
(electrostatic
discharge)
counter-
measures
used.
1-15