Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 87

CompoNet Networks
Master
Sub-menu/command
Parameter Edit
Load
Save
Add To Network (master only) Adds the PLC to which the selected master is
Jump to Other Network
(master only)
Combine two PLCs (master
only)
Display Error Log (master
only)
Monitor
Toggle Position
Copy
Paste
Delete
Edit Name
Edit Node Address (slave
only)
Print Preview
Start a Start with
dedicated tool Settings
Inherited
Start Only
Additional Functions
Slave
Description
Enables editing device parameters.
Loads parameters from a device parameter
file.
Saves device parameters to a file.
connected to another network.
Switches the display to another network to
which the PLC of the selected master is
connected.
Combines two PLCs in different Network
Configuration Windows into one PLC.
Displays present errors and the CPU Unit
error log online of the CPU Unit to which the
selected master is connected.
Enables monitoring a device on the network
(supported devices only).
Moves a component's icon which is shown in
the Network Configuration Window above or
below the network line.
Copies the selected device.
Pastes the device on the clipboard.
Deletes the selected device.
Changes the selected device's name.
Edits the selected device's node address.
Displays the print preview for the selected
device's parameters.
Starts the associated application while
keeping the communication settings of the
PLC to which the selected master is
connected.
Starts the associated application.
Starts the device's additional functions. The
functions depend on the device. For details on
functions, refer to the corresponding Unit
manual.
1-6 Menus
1-6-2 Pop-up Menus
Offline Online
OK OK
OK No
OK OK
OK No
OK No
OK No
No OK
No OK
OK No
OK No
OK No
OK No
OK No
OK No
OK OK
No OK
OK OK
OK OK
1-59