Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 52

1-4 PLC Connecting Cables
1-4-2 Connecting CJ-series CJ2 CPU Units, CP-series PLCs and NSJ-series Controllers
Using Commercially Available USB Cable
3. The following dialog box will be displayed. Select the Install the software
automatically (Recommended) Option and click the Next Button.
Note 1:
1-24
If the software cannot be installed automatically, refer to Installing a Specified USB
Driver later in this section.
2: If the installation media is not inserted or the USB device driver is installed for another
port, a Driver List Dialog Box will be displayed. Make sure that the newest driver is
selected and click the Next Button.