Editing Slave Parameters; Setting Slave Parameters - Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual

7-7 Editing Slave Parameters

7-7-1

Setting Slave Parameters

7-7 Editing Slave Parameters
By editing Slave Unit parameters, the Slave Unit operating time (bit I/O interval) can be
set, and Unit and bit comments can be input.
7-7-1 Setting Slave Parameters
Use the following procedure to edit Slave Unit parameters.
1. With the CX-Integrator online, transfer the network configuration to the computer.
2. From the Network Configuration Window, double-click the Master Unit, or
7-28
Alternatively, the network configurations can be read from the CX-Integrator
project file.
right-click it and select Parameter - Edit from the menu. (Alternatively, select
Parameter - Edit from the Component Menu.)
Double-click or right-click, and select
Parameter - Edit.
The Slave Parameter Dialog Box will be displayed.
Example: CRT1-ID16
The slave parameters depend on the Unit. For parameter descriptions and
setting instructions, refer to the Slave Unit manual.