Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 380

9-2 Transferring Screen Data through the PLC
9-2-2 Procedure
12. Click the OK Button to create the new screen data. The created screen data will
13. To transfer the screen data to the NS-series PT, select either Quick Transfer [To
For details on the transfer method, refer to the CX-Designer User's Manual (Cat.
No. V099).
The following flowchart outlines the procedure up to the screen data transfer.
9-10
be created in a project file (.ipp extension) for transfer to the NS-series PT.
PT] or Transfer [To PT] from the PT menu. The following dialog box will be
displayed for confirmation.
Select the created screen data (project file).
Set the communications path (PC – PLC – PT).
Click the Connect Button to start communications with the PT.
Transfer the project file.