Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 318

6-14 Monitoring Devices
6-14-2 Monitoring Devices
Status Tab Page
The Status Tab Page displays the status of the master and slaves in remote I/O
communications.
Remote I/O communications between the master and slaves can be started or
stopped by clicking the Start Remote I/O Communication or Stop Remote I/O
Communication Button.
The slave status indicators change according to the status of the slave as shown
below.
Gray
Blue
Red
To monitor the detailed status of another slave device, select the corresponding node
address.
6-66
Indicator
Device not registered
In normal communications
Communications error
Status
Master status
Starts remote I/O
communications.
Stops remote I/O
communications.
Slave status
Stops remote I/O for
detailed slave status
Detailed slave status