Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 344

7-6 Editing Master Unit Parameters
7-6-1 Master Unit Parameter Settings
Registration Table Tab Page
Unregistered
Device List
Registered Device
List
Advanced Setting
7-20
Name
Displays the Slave Units that are not participating in the network and are
not registered.
• While connected to the network online, if the network configuration has
been uploaded to the computer, all unregistered Slave Units connected
to the network will be displayed. (If only the Master Unit data has been
uploaded to the computer while connected to the network, no Slave
Units will be displayed.)
• When online, in cases other than those given above, all Slave Units in
the current project will be displayed.
Displays all registered Units participating in the network.
• If Transfer [Unit to PC] is executed while connected to the network
online, all Slave Units registered in the Master Unit Registration Table
will be displayed.
• When online, in cases other than those given above, no Slave Units will
be displayed.
Displays the Advanced Setting Dialog Box. Used to set the status of Slave
Units participating in the network.
Function