Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 73

System Overview
The System Overview displays the relationships between networks.
• The System Overview displays the relationships between all networks registered in
the current project and the relationships to components connected to more than one
network. The following information is displayed.
- Networks types, names, and addresses (The address is not displayed if a local
network table is not registered, i.e., when the network address is 0.)
- Number of nodes on each network.
- Component models, names, and node addresses (The node address is displayed
only if it has been set.)
Note: CompoWay/F and NT Links are not displayed by default. They can be
displayed using the System Overview Setting Dialog Box, described later.
• The Network Configuration Window for any network can be displayed by
double-clicking the network or by right-clicking the network and selecting Open
Detailed Network View.
• The following Network View Setting Dialog Box can be displayed by right-clicking in
any open area in the System Overview and selecting Network View Setting.
Select a network and click the Up and Down Arrows to change the display order.
You can also clear the Hide CompWayF and NTLink Networks Option so that serial
communications for CompoWay/F and NT Links are displayed as networks.
1-5 Window Descriptions
1-5-2 Main Window
Displays relationships
between networks.
1-45