Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 57

1-4-2 Connecting CJ-series CJ2 CPU Units, CP-series PLCs and NSJ-series Controllers
4. The following dialog box will be displayed if the installation is completed normally.
Click the Finish Button.
Windows 2000
1. Turn ON the power supply to the CPU Unit, and connect USB cable between the
USB port of the computer and the peripheral (USB) port.
After the cable has been connected, the computer will automatically recognize the
device and the following message will be displayed.
2. The following message will be displayed. Click the Next Button.
1-4 PLC Connecting Cables
Using Commercially Available USB Cable
1-29