Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 151

Note Exporting Master Unit Device Parameters to Special Files
Device parameters for OMRON DeviceNet Master Units and DeviceNet Units
(CVM1-DRM21-V1, C200HW-DRM21-V1, and CS1W-DRM21(-V1)) can be exported to
files for NetXServer for DeviceNet or DRM_UNIT files for Open Network Controllers.
Use the following procedure to export device parameters for OMRON DeviceNet Master
Units and DeviceNet Units.
NetXServer DDE setting file
NetXServer ONC setting file
ONC master setting file
Refer to the hardware and software manuals for the specific product for application
methods of the exported files.
Note Some of the comment data exported in CSV format can be used in the
CX-Programmer's conversion tables by taking the data through spreadsheet software.
1 Select the Master Unit.
2 Select Network
3 Select the export type.
The three export types listed in the following table are
supported.
Export type
Scan list information in NetXServer DDE Edition file format
Scan list information in NetXServer ONC Edition file format
Scan list information in ONC master parameter setting file
format
4 If valid devices are registered in the scan list, a dialog box will be
displayed to specify the folder and file name.
5 Specify the folder and file name and click the Save Button.
The data will be exported to a file.
2-9
− −
Parameter Save from the menu bar.
Contents
File Operations
2-9-2 Procedures
2-59