Resetting Component - Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual

7-5 Uploading, Downloading, and Comparing Component Parameters
7-5-4

Resetting Component

It may be necessary to reset a component in order to enable the new settings
depending on the component. Use the following procedure to reset components.
1. Connect the CX-Integrator online.
2. Select the component on the CompoNet Network to be reset.
3. Right-click and select Parameter – Edit from the menu.
4. Click the Reset Button (see note) in the Parameter Edit Dialog Box.
Note: The Reset Button does not appear for components that do not require a reset to
enable new settings.
7-5-4 Resetting Component
7-17