Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 349

Setting the Slave Active Timer and Enabling Waiting for All Slaves
The Slave Active Timer and Enable Waiting All Slave Active Function are set to control
operation when a slave joins the network. The Slave Active Timer, Enable Waiting All
Slave Active Function, and Registration Table Check Type are set as follows:
1. Turn ON the REGS switch on the front of the Master Unit.
2. Turn ON the CompoNet Unit and computer.
3. Start the CX-Integrator and connect online.
4. Right-click the Master Unit Icon in the Network Configuration Window and
select Parameter - Edit. The Master Unit's Parameter Dialog Box will be
displayed.
5. Select the Edit the Registration Table Check Box on the General Tab Page.
The Registration Table Tab Page will be displayed.
6. Click the Advanced Setting Button. The Advanced Setting Dialog Box will be
displayed.
7. Adjust the settings.
For information on settings, refer to the Registration Table Tab Page in 7-6-1
Master Unit Parameter Settings.
8. Click the OK Button. The Advanced Setting Dialog Box will close.
9. Click the OK Button. The settings will be saved.
7-6 Editing Master Unit Parameters
7-6-2 Editing the Registration Table
7-25