Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 70

1-5 Window Descriptions
1-5-2 Main Window
Display in
Workspace
Window
Accessible
network
Inaccessible
networks
Network Configuration Window
When the network configuration is uploaded online from the target PLC, the network
configuration will be displayed in this window. If a network is inserted offline, the new
network will be displayed in the Network Configuration Window.
The Network Configuration Window corresponds 1:1 with the Workspace Window.
Online (Same for All Network Types)
The target component's actual network configuration (including component
parameters) can be uploaded online from the target component by selecting Transfer
[Network to PC] after selecting Connect. The uploaded network configuration will be
displayed in this Network Configuration Window.
Meaning of Window Background Colors and Target Component Highlighting
The background of the Network Configuration Window will be gray when the window
can be accessed. The target component will be highlighted with a green border.
The window title shows network number (assigned in order starting
with Network1), then the network type, and finally the network
address in parentheses.
1-42
Status
Right-click the network and select
Connect.
Networks created offline or networks for
which the communications configuration
has been uploaded and then the
connection was changed to a different
network by right-clicking and selecting
Connect.
The network type is displayed after the network number.
The background is gray when online and white when offline.
Operation
The default component name is "Compo"
followed by a number (assigned in order starting
with 1).
The target PLC is highlighted with a green
border.
Remarks
Only one network can be accessed at
any one time. Network configurations
can be uploaded or compared only for a
network in this status.
Note: Access is possible to a network
only when it is connected.
Note: Access is not possible to a
network that is not connected.