Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 63

Note The following operations can be performed on the Workspace Window, Output
Window, Component List Window, and Outline Window.
Moving a Window and Displaying the Window Separately
Drag the window by its top border to move it.
Closing a Window
Click the X Button (Close Button) at the upper-right corner of the window.
Displaying a Window
Select the desired window from the View
next to the windows that are displayed.)
Online Connection Information Window
The Online Connection Information Window displays the online/offline status and the
Relay PLC's communications settings.
When online, the target PLC will be displayed in a tree structure with all of the
Communications Units and ports that belong to it.
Online Operation
The target PLC and Communication Units/ports mounted to the target PLC will be
listed below the relay PLC.
Relay PLC Communications Settings
The relay PLC's communications settings will be displayed to the right of the Online
icon ( Online).
Relay PLC
Target PLC
Target PLC Information
Target PLC [CJ1M-CPU22] Net (0), Node (0)
Description:
In brackets
1) [Target PLC's CPU Unit
[ ] to the right of
TargetPLC
Target PLC's Target PLC's CPU Unit
CPU Unit model model
After Connecting Online
The target PLC is displayed in green.
model]
Network address (1 to 127,
decimal)
Note: This is the network
1-5 Window Descriptions
1-5-2
−
Windows Menu. (A check mark appears
When the computer is directly
connected to a PLC, the same
PLC will be both the relay PLC
and the target PLC.
3) Node address
2) Network address
1) Target PLC's CPU Unit model
2) Network address
address registered when
this PLC is registered as
the target PLC via the
relay PLC.
Main Window
3) Node address
Node address (decimal)
Note: This is the node
address on the
network registered
when this PLC is
registered as the
target PLC via the
relay PLC.
1-35