Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 222

4-3 Manually Setting Data Links
4-3-9 Creating, Reading, and Writing CSV Files (Saving)
(3) <area1>
(4) <area2>
4-30
Tag name
<start-type> Specify the area type for Link
(Link Area 1 Area 1.
type)
<start-ch> The beginning word for Link
(Link Area 1 start Area 1.
address)
Node address
Node
No.
Link word
Link
start
<link- address
area>
Size (Unit:
Link size words)
Offset
Offset
size
<start-type> The area type for Link Area 2.
(Link Area 2
type)
<start-ch> The beginning word for Link
(Link Area 2 start Area 2.
address)
Node address
Node
No.
Link word
Link
start
<link-
address
area>
Size (Unit:
words)
Link size
Offset
Offset
size
Description
Same as for status area type.
Same as for status area start
address.
The node 1 to 62
address for
linking at
Link Area 1.
The Set the link start address + link
beginning size for the above link node.
link word for
Link Area 1.
The link size Set any value.
for Link Area
1.
The offset Set any value. If no offset is
size for Link required, set 0.
Area 1.
Same as for status area type.
Same as for status area start
address.
The node 1 to 62
address for
linking at
Link Area 2.
The Set the link start address + link
beginning size for the above link node.
link word for
Link Area 2.
The link size Set any value.
for Link Area
2.
The offset Set any value. If no offset is
size for Link required, set 0.
Area 2.
Set value