Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 277

6-7-2 Editing Device Parameters on CVM1-DRM21-V1 and C200HW-DRM21-V1
General Tab of CVM1-DRM21-V1 or C200HW-DRM21-V1
Download parameters (Usable only when online.)
Upload parameters (Usable only when online.)
Item
Unregistered Device List Displays unregistered devices. Unregistered devices refer to slaves that
Registered Device List
Device Register and
Unregister Buttons
Auto allocation as is
registered
Allocate/Unallocated
Button
Explicit Message
Communication Only
Button
Start Remote I/O
Communication at
Start-Up
Upload
Download
Compare
6-7 Master Parameter Editing Details (Tab Descriptions)
Compare parameters (Usable only when online.)
are displayed in the Network Configuration Window but have not been
registered with the master.
Displays slaves that are presently registered with the master.
: By pressing this button, the selected device will move from the
Unregistered Device List to the Registered Device List.
: By pressing this button, the device will move from the Registered
Device List to the Unregistered Device List.
Check this box when registering the slaves with the master in the Edit
Device Parameters Window so that the slaves will be allocated to an
unoccupied area in blocks of words in order of registration.
Click this button to unregister the I/O allocations or to make the I/O
reallocations.
Check this button to enable explicit message communications
(transmission only) without remote I/O communications.
Check this box to enable remote I/O communications automatically when
the master starts up.
Uploads the parameters of the network device online.
Downloads the parameters to the network device on line.
Compares the parameters of the selected network device with the
parameters stored in the CX-Integrator.
Unregistered Device List
Device Register button
Device Unregister button
Automatic allocation as registered
An asterisk (*) appears when the
slave is registered to allow explicit
message only.
Registered Device List
Register/Unregistered Button
Explicit Message Communication
Only
Start Remote I/O Communication at
Start-Up
Description
6-25