Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 99

Designing DeviceNet, CompoNet, and CompoWay/F Networks Offline
Networks can be designed on the CX-Integrator even before they have been installed.
Parameters for individual DeviceNet and CompoNet masters and slaves can be set.
Parameters for individual CompoWay/F slaves can be set.
The specified parameters can be saved in project files.
All DeviceNet device, CompoNet, and CompoWay/F component properties are included
in the project file (.cin).
Overall Procedure
● DeviceNet Networks
and CompoNet
Networks
Add devices to the virtual network.
Set slave parameters for slaves that require
Register slaves in the master.
Set master parameters.
Start the CX-Integrator.
setting.
Save everything in the project file (.cin).
2-1
● CompoWay/F Networks
Add CompoWay/F slaves to the virtual network.
Set CompoWay/F slave parameters.
Basic Procedures
2-7