Printing - Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual

Printing

2-12
File − Print
This section describes the procedure for printing device parameters and comments from
the currently displayed network configuration.
Use the following procedure to print.
1 To print only part of the device parameters or comments, select the devices for
which to print.
2 Select File
If DeviceNet devices were selected, the following dialog box will be displayed.
·
·
3 For DeviceNet and CompoNet devices, select the range of devices for which to print.
All Devices:
Selected Device:
Only one of these options can be selected.
4 Select the data to print. (DeviceNet only)
Device Parameter:
I/O Comments:
Only one of these options can be selected.
5 If necessary, click the Properties Button and set the printer.
The printer settings will depend on the printer being used.
6 Click the OK Button.
The data will be printed.
If I/O comments are being printed when using DeviceNet, the following comments
will be printed depending on the device.
−
Print.
Using DeviceNet
Using CompoNet
Prints data for all devices in the network configuration.
Prints data for only the selected devices.
Prints the device parameters.
Prints device comments.
Device type
Master device Comment for the master (if one exists) and comments for devices
registered in the scan list
If more than one connection is supported for a slave device registered
in the scan list, only the comment for the connection used by the
master device will be printed.
Slave device Comment for the slave
If more than one connection is supported for a slave device, the
comments for all connections will be printed even if they are not
registered in the master device.
2-11-2
Printed comment data
2-12 Printing
Procedure
2-63