2-5
7. Enter the node address and click the Next Button for a PLC click the Finish Button
for a CompoWay/F Slave (e.g., Temperature Controlled.
8. For a PLC, select the port to connect.
• To connect CompoWay/F to a serial port on the CPU Unit, select the CPU Unit
with the port to connect CompoWay/F and click the Next Button.
Select the port to connect to CompoWay/F and click the Finish Button.
• To connect CompoWay/F to a serial port on a Serial Communications Unit,
select the Unit with the port to connect CompoWay/F and click the Next
Button.
Creating Virtual Network Configurations Offline
2-5-2
Procedure
2-37