System Configuration Example - Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual

Table of Contents

System Configuration Example

The procedure is described below, from data link creation through startup, taking a

Controller Link data link system as an example.

Node address

Data Link Setup Example

The refresh sequence for nodes 1 and 2 is as follows: #1, #2, #3. For node 3, the order

is #2, #1, #3. Node address 03 does not receive all of the data sent from node address

02. Rather, data from the 20 words (CIO 1240 to CIO 1259) beginning from the start

address +10 words (i.e., the offset) is received in IR 300 to IR 319. Other data is

received with no offset.

CX-Integrator

Peripheral Bus or Host Link

Controller Link network

Manually Setting Data Links

System Configuration Example

Show Quick Links

Table of Contents