Edit Device Parameters On Cs1W-Drm21(-V1)/Cj1W-Drm21 - Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual

6-7 Master Parameter Editing Details (Tab Descriptions)

6-7-1 Edit Device Parameters on CS1W-DRM21(-V1)/CJ1W-DRM21

6-7-1 Edit Device Parameters on CS1W-DRM21(-V1)/CJ1W-DRM21
Note When the CS1W-DRM21(-V1)/CJ1W-DRM21 DeviceNet Unit is used, select the
device and then select Component - Property and turn ON Enable Master Function
in the Properties Dialog Box.
The following dialog box will be displayed when the CS1W-DRM21(-V1)/
CJ1W-DRM21 is selected.
The Edit Device Parameters Dialog Box consists of the following six tab pages.
General
I/O Allocation (OUT)
I/O Allocation (IN)
Communication Cycle Time
Slave Function
Message Timer
6-22
Tab
Registers the device with the scan list and makes I/O allocations
automatically.
Allocates the output data and sets the output memory block for the
CPU Unit with the advanced setup function.
Allocates the input data and sets the input memory block in the CPU
Unit with the advanced setup function.
Sets the communication cycle time.
Makes necessary settings that enable the slave function.
Makes monitor timer settings for message communications (both
explicit and FINS message
communications).
Description