Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 98

2-1 Basic Procedures
Reading Network Configurations and Parameters from Actual Networks and
Saving Them to Files Online
To simplify maintenance, the target PLC's actual network configuration and component
parameters can be uploaded and saved in a project file (.cin) for each network.
Overall Procedure
Connect online to the relay PLC (= target PLC).
Transfer the local network table to the relay PLC
Connect to a Communications Unit/port to
2-6
Start the CX-Integrator.
Create the local network table.
via the serial connection.
enable accessing it.
Upload the network configuration.
Save the project file (.cin).
Example: Select Component - Auto Online
from the menu bar to automatically connect
online using a serial connection.
Select Tools - Start Routing Table from the
menu bar.
Create the local network table and select
Option - Transfer to PLC.
Right-click the desired network in the Online
Connection Information Window and select
Connect from the pop-up menu.
Right-click and select Transfer [Network to
PC].
Select Network - Parameter - Write to file
from the menu bar.
Required when there
is more than one
Network
Communications Unit
in the relay PLC
(= target PLC).