Table of Contents
Advertisement
Side view
ICP-X7000 Integrated Control Panel
a
a U (signal ground) terminal
Connect to a ground wire.
ICP-X1000 Series Control Panel
Rear view
The following illustration shows the ICP-X1224.
a DC IN A and B connectors
Connect to the supplied AC adaptor.
b U (signal ground) terminal
Connect to a ground wire.
c LAN A1 connector (RJ-45, 1000BASE-T
compliant)
Connect to the switcher system network via an Ethernet
switch.
Connect to the switcher in system configurations that do
not use an Ethernet switch.
MKS-X7075 Extension Adaptor
a
a
b
c
d
d LAN A2 connector (RJ-45, 1000BASE-T
compliant)
Connect to a computer for menu operations in system
configurations that do not use an Ethernet switch.
e LAN B connector (RJ-45, 1000BASE-T
compliant)
Used for LAN A1 connector redundancy.
66
e
Advertisement
Table of Contents
