Table of Contents
Advertisement
Checking and Applying an Island
Configuration
You can check the configuration information and
specifications of each device in an island using the MLS
Manager Home > System > Island > Apply Config menu
(60211.12).
Applying the configuration
After checking the configuration information of each
device on the configuration display screen
([Configuration] tab), check all the changed settings in
the island (rows with marks indicating settings not yet
applied) in each menu in MLS Manager Home > System
> Island, and apply the configuration to the devices.
1
Open the MLS Manager Home > System > Island >
Apply Config menu (60211.12).
2
Press the [Apply All Config] button.
Check the message, then press [OK].
Note
Devices with changed setup are rebooted.
To save setup information to a file
You can save the setup information configured using the
[Island] menu as a system configuration file.
For details, see "Managing System Configuration Files"
(page 489).
To return to the previous setting
Press the [Clear All Config] button to return all settings
(rows with marks indicating settings not yet applied) that
were changed using each menu in MLS Manager Home >
System > Island to the previous setup.
To save the current configuration state
temporarily
Press the [Store Temporary Config] button.
To restore a temporarily saved configuration
state
Press the [Restore Temp Stored Config] button, check the
message, then press [OK].
If there is no temporarily saved configuration state,
nothing is restored and the current state is not changed.
To display device properties
Select a box or control panel bank in the list and press the
properties display on/off button at the top right of the
screen to display the properties of the selected box or
control panel bank on the right side.
Checking specifications information
You can check the specifications information of the
switchers that can be configured in an island on the
information display screen ([Information] tab).
1
Open the MLS Manager Home > System > Island >
Apply Config menu (60211.12).
2
Select the [Information] tab.
3
Select the format you want to check in [Logical
Switcher 1] to [Logical Switcher 4].
Information based on the selected format is
displayed.
4
Select a tab to change the Information to display.
[Box Info] tab: Displays the available/not available
state of the boxes in each switcher in an island.
[Spec Info] tab: Displays the specifications of each
switcher.
[License Info] tab: Displays the license assignment
state of each box in an island.
483
Advertisement
Table of Contents
