Transition Preview; Setting Transition Preview; Executing Transition Preview - Sony MKS-X1115 User Manual

Live production processor system
Table of Contents

Advertisement

Transition Preview

In transition preview mode, the status during a transition
is output on the preview output of the switcher bank.
You can check the change in the image due to a transition
in advance using a monitor configured for the preview
output.
Notes
• In the simple-type transition control block, transition
preview cannot be configured or executed.
• It is not possible to execute a transition preview in the
following cases.
- Transition in progress
- When bus fixed mode is set
- When the switcher bank operation mode is not
standard mode
• The buttons used for configuring and executing a
transition preview must be assigned to the transition
control block beforehand.
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 408).

Setting Transition Preview

There are two modes for a transition preview.
Normal:
Set the [TRANS PVW] button operation mode to
hold mode or lock mode.
In hold mode, the transition preview mode is enabled
only while the [TRANS PVW] button is pressed.
In lock mode, pressing the [TRANS PVW] button
switches between setting and releasing transition
preview mode each time the button is pressed.
For details about setting lock mode/hold mode, see
"Setting the operation mode of the [TRANS PVW]
button in the transition control block" (page 424).
One-time:
Pressing the [TRANS PVW] button switches to
transition preview mode, and then transition preview
mode is released when the transition is completed.
For details about setting normal mode/one-time mode,
see "Setting the Transition Preview Mode" (page 398).

Executing Transition Preview

1
Press the [TRANS PVW] button, turning it on, in the
transition control block.
The [TRANS PVW] button is lit green, and the
switcher enters transition preview mode.
The current program output is displayed on the
preview output monitor.
2
Execute a transition.
The status during the transition is displayed on the
preview output monitor allowing you to check the
changes to the image.
111

Advertisement

Table of Contents
loading

Table of Contents