Table of Contents
Advertisement
d) Disabled for SL keys.
e) 1st row is disabled in key/AUX bus delegation mode.
f) Disabled in free assign mode.
g) 1st row and 2nd row are disabled in key bus mode.
h) 1st row and 2nd row are disabled in key/AUX bus delegation mode.
Transition Control Block
The transition control block is used to execute transitions.
It supports common transitions and independent key
transitions.
c
a Transition execution section
Transition indicator
Fader lever
Display
AUTO TRANS button
b
a
CUT button
For details, see "Chapter 5 Transitions" (page 97).
a
c
Name
Fader lever
Transition indicator
Display
[AUTO TRANS]
button
[CUT] button
b Display
The display shows the following information.
• Left-side display:
Target switcher bank name (M/E1 to M/E5, P/P)
Main and sub assignment status when in multi program
2 mode (MAIN, SUB, MAIN&SUB)
26
d
Description
Move this up or down to execute a
transition.
You can press the [KF] button,
turning it on, to use the fader lever
as a keyframe fader.
Displays the transition progress
using LEDs.
Displays the transition rate.
Executes an auto transition with the
set transition rate and transition
type.
During the transition, the button is
lit amber.
Executes an immediate transition.
Advertisement
Table of Contents
