Control Panel Configuration (Icp-X1000 Series) - Sony MKS-X1115 User Manual

Control Panel Configuration (ICP-X1000 Series)

The ICP-X1000 series Compact Control Panel supports
the following four types of control panel according to the
number of M/E banks and cross-point buttons.
Control panel Number of M/E
banks
ICP-X1224 2
ICP-X1216 2
ICP-X1124 1
ICP-X1116 1
Control panel configuration example
This section describes the ICP-X1224 as an example.
a
a M/E banks (switcher banks)
Each bank is comprised by a cross-point control block,
transition control block, and Flexi Pad control block. By
default, M/E-1 and P/P switcher banks are assigned in
order to the banks from the back.
The ICP-X1124 and ICP-X1116 have only one M/E bank
row. By default, the P/P switcher bank is assigned to the
bank.
You can change the switcher bank assignments.
For details, see "Assigning a Switcher Bank/AUX"
(page 406).
Number of cross-
point buttons
24
16
24
16
b
47
f e
c
b Cross-point control block (see page 48)
The ICP-X1216 and ICP-X1116 each have 16 cross-point
buttons.
c Transition control block (see page 51)
d Flexi Pad control block (see page 53)
e Device control block (see page 54)
f Utility control block (see page 58)
d