Table of Contents
Advertisement
Notes
• The [UNDO] button and [DEL] button cannot be used
in shotbox operation mode.
• The [UNDO] button cannot be used in macro operation
mode. Also, the [DEL] button cannot be used in edit
mode.
Bank selection buttons
Function
Button name
name
Bank 0 to
BANK0 to
Bank 99
BANK99
Bank Select
BANK SEL
Device Control Block
The device control block is used for three-dimensional
transforms using a DME, two-dimensional transforms
using a resizer, executing effect timelines, controlling
a
b
a Mode selection buttons / channel selection buttons
(assignable buttons)
You can assign mode and channel selection buttons in the
Home > Setup > Panel > Module > Button Assign menu
(19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 408).
Description
The memory recall
section switches to the
register display for the
selected bank.
Enter a bank number to
switch the memory recall
section to the register
display for the selected
bank.
54
b Memory recall section (memory recall buttons)
This section displays the functions assigned to the buttons
for the selected operation mode.
The top right button is used to display the selected pattern
number, register number, macro event number, transition
rate input value, and other status display (excluding in
key operation mode).
When a macro is recalled in macro operation mode, the
bottom center button displays the executed event number
and the total number of events.
Numeric keypad mode
Pressing the [BANK SEL] button, [PTN NO.] button, or
[PAUSE] button switches the memory recall section to
numeric keypad mode, where you can enter bank
numbers, wipe pattern numbers, and pause event times.
The currently set numeric value or the value entered in
numeric keypad mode is displayed on the top right button.
devices/frame memory/clip players, entering menu
parameters, and other functions.
d
c
Advertisement
Table of Contents
