Table of Contents
Advertisement
Note
You can also display the Top Menu List menu by
selecting [Shortcut] in level 2 of the menu selection area.
Displaying a menu by double-pressing control
panel buttons
The control panel has buttons that can display a menu
when double-pressed.
Double-press a button to display the corresponding menu.
For details, see "Menus Recalled by Pressing a Button
Twice" (page 505).
Note
The control panel must be linked with the menu.
For details, see "Linking a Control Panel with the Menu"
(page 80).
Setting Menu Items
Menu items are configured, depending on the item, by
setting operation buttons on/off, selecting values, or
entering values.
Types of buttons
The action performed when a button is pressed varies
depending on the function assigned to the button.
Depending on the button, multiple actions may be
combined (for example, on/off + parameter setting).
Button
Description
On/off button
Turns a function on/off (enable/disable).
Execution button
Executes a function.
Pull-down selection button
Select a value from the pull-down list.
Keyboard input button
Press the input field and enter a character string
using the keyboard.
Numeric keypad input button
Press the input field to display the numeric
keypad window and enter a numeric value.
Pop-up display button
Displays a pop-up window for setting/selecting
a function.
Parameter setting button
Displays the analog controls section for
adjusting parameters.
Button
Description
Shortcut button
Jumps to the specified menu.
On/off switch
Turns a function on/off (enable/disable).
Radio button
Turns a function on/off (enable/disable).
Button display status
The button display indicates the following according to
the status.
Button
Status
display
When an on/off button is set to the on (enable)
position:
A blue bar is displayed across the bottom.
When an on/off switch is set to the on (enable)
position:
The switch is slid to the right (on state) and is
displayed in blue.
When adjusting a parameter:
The button is displayed in light blue.
When a radio button is selected:
The button is displayed in blue.
When a setting is not yet applied:
Depending on the function, the setting must be
applied using the [Apply] button.
When a setting is not yet applied, a yellow
asterisk (*) is displayed on the button.
When selection is disabled:
Buttons and switches that cannot be selected are
grayed out.
Groups
Buttons for related functions are grouped.
A line indicating the group name and range of the group
is displayed above the buttons.
Depending on the function, only one button or multiple
buttons within the group may be selected.
75
Advertisement
Table of Contents
