Safe Title; Copy And Swap; Overview - Sony MKS-X1115 User Manual

Safe Title

You can enable/disable the safe title function. When
enabled, the safe title area is displayed.
You can set the safe title area display method (Box1,
Box2, Cross, Grid) in the Home > Setup > System >
Output > Safe Title menu (19101.43).
For details about settings, see "Setting the Safe Title
Area" (page 379).
Note
You can enable/disable the safe title function using a
utility command.
For details about utility commands, see "Utility
Functions" (page 234).
1
Open the Home > Utility > Safe Title menu
(18201.11).
2
Select a tab to switch the target to set.
[Output] tab: Output safe title settings
[Dedicated Out] tab: Dedicated output safe title
settings
For details about outputs and dedicated outputs, see
"Setting the Output Signal" (page 377).
3
Select the target output to set.
To select and set multiple outputs, place a check mark
beside the target outputs to set.
To select and set all outputs, place a check mark in the
Select All checkbox.
4
Enable/disable the safe title function using the [Safe
Title] switch.
On: Enable the safe title function.
Off: Disable the safe title function.

Copy and Swap

Overview

You can copy the settings of a switcher bank or key to
another switcher bank or key.
You can also swap the settings between switcher banks or
keys.
The following settings can be copied/swapped.
• Switcher banks
Copy/swap settings between switcher banks
• Keys
Copy/swap settings between keys
• Wipes
Copy/swap wipe settings between switcher banks
• DME wipes
Copy/swap DME wipe settings between switcher banks
• Independent key transition wipes
Copy/swap independent key transition wipe settings
between keys
• Independent key transition DME wipes
Copy/swap independent key transition DME wipe
settings between keys
• DMEs
Copy/swap DME settings between DME channels
Copy/swap menus
Switcher banks
Copy/swap switcher bank settings using the Home >
Utility > Copy/Swap > M/E menu (18201.31).
Notes
• The following settings cannot be copied/swapped.
– Setup data
– Wipe snapshots
– DME wipe snapshots
– Snapshots
– Effect timelines
– Key snapshots
– Key memory
• When using DME channels on a switcher bank to be
copied, the DME channel selection status may not be
able to be copied depending on the number of DME
channels that can be used.
Keys
Copy/swap key settings using the Home > Utility > Copy/
Swap > Key menu (18201.32).
Notes
• The following settings cannot be copied/swapped.
– Setup data
251