Key Fader Control Block - Sony MKS-X1115 User Manual

e Function buttons
Selects the function to use for a key operation.
Button Description
name
OVERRIDE Assigns a DME channel (DME1 to DME4)
assigned to a different key or bus to the
selected key (override function).
You can press and hold the [OVERRIDE]
button and press a DME channel button to
assign the DME channel to the selected key.
TRACE Switches the delegation to the key for which a
DME channel is assigned (trace function).
You can press and hold the [TRACE] button
and press a DME channel button to switch the
delegation to the key for which the selected
DME channel is assigned.
MON Assigns a DME channel output to the monitor
output.
You can press and hold the [MON] button and
press a DME channel button to assign the
output of the selected DME channel to the
monitor output.
You can check the status using the DME
channel button while the [MON] button is
pressed.
Lit amber: DME channel which can be
assigned to the monitor output.
Lit green: DME channel which is currently
assigned to the monitor output.

Key Fader Control Block

The key fader control block is used for independent key
transition and key snapshot operations.
Button
name
SHOW
KEY
AUTO
DELEG
MORE
f Display
Displays the parameter names and setting values.
g Adjustment knobs
Adjusts the parameters for the item selected by the setting
buttons.
For details, see "Chapter 5 Transitions" (page 97) and
"Key Snapshots" (page 148).
b a
34
Description
Displays the key-processed, key source signal
in the preview output (show key function).
Switches the delegation of the key control
block automatically in sync with the following
control block buttons.
• Transition control block: [KEY1] to [KEY8]
buttons
• Cross-point pad in the cross-point control
block: [KEY1] to [KEY8] buttons
• 1st row on the cross-point control block
(key/AUX bus delegation mode): [KEY1] to
[KEY8] buttons
• Memory recall section on the Flexi Pad
control block (key operation mode): [KEY1]
to [KEY8] buttons
• Key fader control block: Key delegation
buttons
Lights up amber when there are six or more
parameters.
When the [MORE] button is pressed, turning it
on green, the 6th and subsequent parameters
are displayed.
e
d
c