Numeric Keypad Control Block - Sony MKS-X1115 User Manual

Numeric Keypad Control Block

The numeric keypad control block is used for selecting
regions, recalling and saving effect timelines/snapshots/
a
b
a Mode selection buttons
Button Description
name
EFF Switches to effect timeline operation mode.
In effect timeline operation mode, you can
recall and save effect timelines.
SNAPSHOT Switches to snapshot operation mode.
In snapshot operation mode, you can recall
and save snapshots.
SHOTBOX Switches to shotbox operation mode.
In shotbox operation mode, you can recall and
save shotboxes.
MCRO Switches to macro operation mode.
In macro operation mode, you can recall,
save, and edit macros.
b Region selection buttons (assignable buttons)
Use when selecting a region.
You can assign arbitrary regions to buttons, excluding the
blank button at the top left and the [ALL] button, in the
Home > Setup > Panel > Module > Button Assign menu
(19104.21). Up to four regions can be assigned to each
button.
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 408).
Notes
• The blank button at the top left is reserved for future use
and cannot be used.
shotboxes, for recalling and creating macros, for entering
the transition rate, and for other tasks.
c d
• When multiple regions are selected, the first selected
button becomes the reference, and is lit green.
Subsequent selected buttons are lit amber.
• When multiple regions are assigned to a single button,
the region name set for the lowest number is displayed
on the button. The reference region is set according to
the order of priority.
Function name
ME/DME:
M/E-1 to M/E-5
M/E-1 Sub to M/E-5
Sub
P/P
P/P Sub
ME/DME:
DME 1 to DME 4
Dev/Macro:
Device 1 to Device 12
Dev/Macro:
P-Bus
Dev/Macro:
GPI
Dev/Macro:
Router
Dev/Macro:
Macro
User:
User 1 to User 8
40
e
Button name Description
M/E1 to M/E5 Switcher bank
M/E1 SUB to regions
M/E5 SUB
P/P
P/P SUB
DME1 to DME regions
DME4
DEV1 to Device regions
DEV12
P-BUS P-Bus region
GPI GPI region
RTR Router region
MCRO Macro region
USER1 to User regions
USER8