Table of Contents
Advertisement
To enable auto run
Press the [Auto Run On] button.
To disable auto run
Press the [Auto Run Off] button.
Editing a Shotbox Register
You can copy, move, and swap register data. You can also
rename, lock, and delete a register.
Copying a register
Notes
• An empty register cannot be copied.
• A locked register cannot be copied.
1
Open the Home > Register > Shotbox > Edit Register
> Copy/Move/Swap menu (18306.22).
A list of copy source registers is shown on the left,
and a list of copy destination registers is shown on the
right.
2
In the list on the left, select a copy source register.
To select and copy multiple registers, place a check
mark beside the target registers to copy.
To select and copy all registers, place a check mark in
the Select All checkbox.
You can also press the [Select Register(s)] button and
enter a register number in the numeric keypad
window.
3
In the list on the right, select a copy destination
register.
When multiple registers are selected, select the first
copy destination register.
You can also press the [Select Destination] button
and enter a register number in the numeric keypad
window.
The copy destination of the first register selected on
the left is the first register selected on the right, and
the subsequent registers on the right in the same
relative positions as the selected registers on the left
become copy destinations. The first register on the
right is shown in light blue, and the subsequent copy
destination registers are shown in blue gray.
4
Press the [Copy] button.
5
Check the message, then press [OK].
To search for a register
Press the [Search] button, enter a character string to
search for in the input field in the displayed window, and
press the [Enter] button.
Only registers containing the entered character string are
displayed.
To copy without renaming a destination register
Set the [w/o Name] button to the on state.
Moving a register
Notes
• An empty register cannot be moved.
• A locked register cannot be moved.
Select a move source register and move destination
register in the same way as for copying a register and
press the [Move] button.
For details, see "Copying a register" (page 304).
To move without renaming a destination register
Set the [w/o Name] button to the on state.
Swapping registers
Select the registers to swap in the same way as for
copying a register and press the [Swap] button.
For details, see "Copying a register" (page 304).
To swap without renaming the registers
Set the [w/o Name] button to the on state.
Locking a register
1
Open the Home > Register > Shotbox > Edit Register
> Browse menu (18306.21).
2
Select the target register to lock.
To select and lock multiple registers, place a check
mark beside the target registers to lock.
To select and lock all registers, place a check mark in
the Select All checkbox.
You can also press the [Select Register(s)] button and
enter a register number in the numeric keypad
window.
3
Press the [Lock] button.
To release the lock
Select the target register to unlock and press the [Unlock]
button.
304
Advertisement
Table of Contents
