Table of Contents
Advertisement
Note
The installation method may vary depending on your
computer (tablet or PC). For details about installing a
certificate, refer to the operating instructions for the
computer.
Signing In / Signing Out
When signing in for the first time using an
administrator account
By default, "admin" is the only administrator user
account registered.
When signing in for the first time, enter "admin" for the
user name and "admin" for the password, and press [Sign
In].
The software End User License Agreement confirmation
window appears. Press the [Agree] button if you accept
the conditions.
When you agree, a change password message appears.
Press [OK] and change the password.
Note
The password must be 8 to 32 characters, containing at
least one single-byte alphabetic character and at least one
single-byte numeric character.
Signing in to the MLS-X1 menu
1
Access the MLS-X1 menu.
Enter the URL of the MLS-X1 menu in a browser.
"https://IP address of MLS-X1 menu/"
The MLS-X1 menu sign-in screen appears.
Note
Enter one of the following IP addresses of logical box
1 (primary box) of the corresponding logical switcher
as the IP address of the MLS-X1 menu.
• IP address displayed on the control panel display
• Address of standard interface 1 of logical box 1
(primary box) of the corresponding logical
switcher, which is set in the MLS Manager Home >
System > Island > Box Network menu (60211.05)
of MLS Manager
For details about settings, see "Configuring Box
Network Settings" (page 478).
It is set to "192.168.100.1" by default.
2
Enter your user name and password, and press [Sign
In].
The panel selection screen appears.
To enter your user name automatically when
signing in
Place a check mark in [Remember username].
71
Advertisement
Table of Contents
