Table of Contents
Advertisement
Note
When the system signal format is 720P, [Frequency]
is set to [59.94] (fixed).
5
Apply the settings.
In a 1M/E box switcher configuration:
Press the [Apply] button in the [Signal Format/
Frequency/Ref] group.
In a multiple-box switcher configuration:
Press the [Apply] button in the [Signal Format]
group.
To return to the previous setting
Press the [Clear] button.
6
Check the message, then press [OK].
The switcher system reboots.
Setting the Reference Signal
You can set the input/output reference signal to HD tri-
level sync or black burst.
Note
In a multiple-box switcher configuration, the reference
signal lock mode and input/output reference signals
cannot be configured. The reference signal is configured
using MLS Manager.
Setting the reference signal lock mode
1
Open the Home > Setup > System > Format/Config >
Format menu (19101.22).
2
Select the [Settings] tab.
3
In the [Ref Lock Mode] group, select a lock mode.
External: External lock mode
Sync to input reference signal.
Internal: Internal lock mode
Use switcher internal signal as the reference
signal.
4
Press the [Apply] button in the [Signal Format/
Frequency/Ref] group.
To return to the previous setting
Press the [Clear] button.
5
Check the message, then press [OK].
The switcher system reboots.
Setting the input reference signal
Note
Cannot be set when the reference signal is in internal lock
mode.
1
Open the Home > Setup > System > Format/Config >
Format menu (19101.22).
2
Select the [Settings] tab.
3
In the [Ref Input Format] group, select a reference
signal.
Tri Sync: HD tri-level sync
BB: Black burst or sync
4
Press the [Apply] button in the [Signal Format/
Frequency/Ref] group.
To return to the previous setting
Press the [Clear] button.
5
Check the message, then press [OK].
The switcher system reboots.
Setting the output reference signal
1
Open the Home > Setup > System > Format/Config >
Format menu (19101.22).
2
Select the [Settings] tab.
3
In the [Ref Output Format] group, select a reference
signal.
Tri Sync: HD tri-level sync
BB: Black burst or sync
Note
When the system signal format is 720P and the input
reference signal is set to [Tri Sync], the black burst
field information generated by the switcher is used
when the output reference signal is set to [BB].
4
Press the [Apply] button in the [Signal Format/
Frequency/Ref] group.
To return to the previous setting
Press the [Clear] button.
5
Check the message, then press [OK].
The switcher system reboots.
368
Advertisement
Table of Contents
